1. S.S. Pang, G. Li, H. D. Jerro, J.A. Peck, and M.A. Stubblefield, “Fast Joining of Composite Pipes Using UV Curing FRP Composites,” Polymer Composites, Vol. 25, No. 3, pp. 298-306, (2004).
2. J. A. Peck, G. Li, S. S. Pang, and M. A. Stubblefield. “Light Intensity Effect on UV Cured FRP Coupled Composite Pipe Joints,” Composite Structures, 64 (3-4), pp. 539-549, 2004.
3. G. Li, D. Davis, C. Stewart, J. Peck, and S.S. Pang, “Joining Composite Pipes Using Hybrid Prepreg Welding and Adhesive Bonding,” Polymer Composites, Vol. 24, No. 6, pp. 697-705, 2003.
4. G. Li, J.E. Helms, and S.S. Pang, “Development of High-Pressure Composite Butt-Weld Joint,” Polymer Composites, Vol. 24, No. 1, pp.60-67, 2003.
6. G. Li, N. Pourmohamadian, A. Cygan, J. Peck, J. E. Helms, and S.S. Pang, “Fast Repair of Laminated Beams Using UV Curing Composites,” Composite Structures, Vol. 60, No. 1, pp. 73-81, 2003.
7. J.E. Helms, G. Li, and S.S. Pang, “Buckling Analysis of A Taper-Taper Adhesive-Bonded Composite Joint,” Polymer Composite, Vol. 24, No. 1, pp. 45-52, 2003.
8. S. Kidane, G. Li, J.E. Helms, S.S. Pang, and E. Woldesenbet, “Analytical Buckling Load Analysis of Grid Stiffened Composite Cylinders,” Composite Part B: Engineering, Vol. 33, No. 1, pp. 1-9, 2003.
9. G. Li, S.S. Pang, E. Woldesenbet, M. Stubblefield, P.F. Mensah, and S.I. Ibekwe, “Investigation of Preperg Bonded Composite Single-Lap Joint,” Composite Part B: Engineering, Vol. 32, No. 8, pp. 651-658, 2001.
10. P.F. Mensah, O. Soysal, G. Li, A. Jana, and M.A. Stubblefield, “Transient Two Dimensional Numerical Modeling of Asymmetric Curing Process,” Polymer Engineering & Science, 2005, (accepted).
11. Specimen Geometry Effects on the High Strain Rate Testing of Graphite/Epoxy Composites,” E. Woldesenbet and J.R.Vinson, AIAA Journal, Vol.37, No.9, 1999, 1102-1106.
12. “Fiber Orientation Effects on High Strain Rate Properties of Graphite/Epoxy Composites,” E. Woldesenbet and J.R. Vinson, Journal of Composite Materials, Vol.35, No.6, 2001, 509-521.
13. “Effect of Filler Addition on the Compressive and Impact Properties of Glass Fiber Reinforced Epoxies,” N. Gupta, B.S. Brar and E. Woldesenbet, Bulletin of Materials Science, Vol.24, No.2, 2001, 219-223.
14. “Studies on Compressive Failure Features in Syntactic Foam Material,” N. Gupta, Kishore, E. Woldesenbet and S. Sankaran, Journal of Material Science, Vol.36, 2001, 4485-4491.
15. “Response of Syntactic Foam Core Sandwich Structure Composites to Three-Point Bending,” N. Gupta, E. Woldesenbet, Kishore, and S. Sankaran, Journal of Sandwich Structures and Materials, Vol. 4, No. 3, 2002, 249-272.
16. “Determination of Moisture Effects on Impact Properties of Composite Materials,” E. Woldesenbet, J.R. Vinson and N. Gupta, Journal of Material Science, Vol.37, No. 13, 2002, 2693-2698.
17. “Compressive fracture features of syntactic foams – microscopic examination,” N. Gupta, E. Woldesenbet, Kishroe, and S. Sankaran, Journal of Material Science, Vol 37, No 15, 2002, 3199-3209.
18. “Optimization For Buckling Loads of Grid Stiffened Composite Panels,” E. Woldesenbet, S. Kidane and S.S. Pang, Journal of Composite Structures, Vol. 60, No. 2, 2003, 159-169.
19. “High Strain Rate Properties of Balanced Angle-Ply Graphite/Epoxy Composites,” A. Jadhav, E. Woldesenbet and S.S. Pang, Composites Part B: Engineering, Vol. 34, No. 4, 339-346.
20. “Hygrothermal studies on syntactic foams and compressive strength determination," N. Gupta and E. Woldesenbet, Journal of Composite Structures, Vol. 61, No. 4, 311-320.
21. “Finite Element Stress Analysis of Composite Sucker Rods,” E. Woldesenbet, ASME Journal of Energy Resources Technology (JERT), Vol. 125, Issue 4, 2003, 299-303.
22. “Compression Properties of Syntactic Foams: Effect of Radius and Specimen Aspect Ratio,” N. Gupta, E. Woldesenbet and P. Mensah, Composites Part A: Applied Science and Manufacturing, Vol. 35, No. 1, 2004, 103-111.
23. “Effect of Cenosphere Radius Ratio on Syntactic Foam Core Sandwich Composites,” E. Woldesenbet, N. Gupta and H.D. Jerro, Journal of Sandwich Structures and Materials, Accepted.
24. “Microballoon Wall Thickness Effects on Properties of Syntactic Foams," N. Gupta and E. Woldesenbet, Journal of Cellular Plastics, Accepted.
25. “Effects of Density and Strain Rate on Properties of Syntactic Foams,” A. Jadhav, N. Gupta and E. Woldesenbet, Journal of Material Science, Submitted.
26. “Characterization of Flexural Properties of Syntactic Foam Core Sandwich Composites and Effect of Change in Microballoon Radius Ratio,” N. Gupta and E. Woldesenbet, Journal of Composite Materials, Submitted.